Chinese factories typically ask for the balance before the goods are handed to the forwarder or before they release the original shipping documents; some accept payment against a copy of the bill of lading. Either way, the last moment you can still fix a problem cheaply is the inspection before shipment. Here is a checklist for robots, kiosks, panels, mini PCs, inverters and batteries: what to check, how many units, and what to agree with the factory before production starts.

Why inspect before the balance payment
A defect found at the factory costs the factory a repair or a replacement. The same defect found in your warehouse costs you the freight, the duty, a dispute at a distance and lost sales. Tie the balance payment to a passed inspection in the purchase contract, and agree the checklist with the factory before production, not on the day of shipment.
→ Incoterms® rules when buying from China: EXW, FCA, FOB or CIF — which to choose
Which inspection, when
A pre-production check confirms the materials and key components before assembly starts — useful for a first order or a changed design. A check during production catches problems while they can still be fixed on the line. The pre-shipment inspection is usually done when production is finished and most of the goods are packed; it is the one to tie to the balance. A loading check confirms that the right cartons, in the right quantity, go into the container.
For a first order with a new factory, plan at least the pre-shipment inspection; for a large or custom order, add the check during production.
→ How to order samples from China: what to check before you pay
Sampling: agree the AQL in the contract
Inspectors do not open every carton. They draw a random sample under ISO 2859-1, the standard sampling scheme indexed by acceptance quality limit (AQL) for lot-by-lot inspection: the sample size follows from the lot size and the inspection level, and the AQL sets how many defective units the sample may contain. General inspection level II is the most commonly used; for long function tests on expensive units, a smaller special level is sometimes agreed.
Inspection companies usually sort defects into critical (unsafe or illegal), major (the product does not work or cannot be sold) and minor. These classes are industry practice, not definitions from ISO 2859-1, so write your own definitions into the contract. A common choice is to fail the lot on any critical defect and to set separate AQL values for major and minor defects, often 2.5 and 4.0. A clean sample does not prove that the whole lot is free of defects. Write the standard, the inspection level and the AQL values into the purchase contract, so that pass or fail is not a matter of opinion.
Function tests on every sampled unit
Power on each unit and run it the way your customer will: the touch screen across the whole surface, Wi‑Fi and Bluetooth, every port, the camera or printer if there is one, the speakers and microphones. For robots, run a full delivery or reception route. For inverters and batteries, agree the test procedure with the factory in advance — for example power-on, communication with the battery management system, output under a defined load and the readings in the monitoring app — and let the factory's technician run it while the inspector records the results. A full charge and discharge cycle takes hours; if you want one, plan it, and for air freight make sure the batteries are brought back to the shipping charge level afterwards.
Compare each unit with the golden sample and the signed specification: model and hardware revision, firmware version, screen, processor and memory, and the battery cells and capacity as far as they can be checked without opening the unit — or agree to open one unit. In your checklist, classify an unapproved firmware version or a substitute component as a major defect, even if the unit works.
→ Self-ordering kiosk 21.5″ with printer, QR, NFC and camera · Interactive flat panel 65″–86″, 4K, Android 16 with Google apps · Restaurant delivery robot, 3 trays, 30 kg
Labels, packaging and documents
Check the rating label (model, input voltage and power, serial number), the marks your market requires, the plug or power supply for your country, the manuals and accessories in each box, and the carton markings: model, quantity, gross weight and your order number. Count the cartons and compare them with the packing list.
Drop-test a few cartons by a procedure agreed in advance — the height and the number of drops — check that the packing holds the unit firmly, and photograph the inside and outside of an opened carton. Ask for the inspection report with photos of every defect, not only the summary.
Batteries and battery-powered devices
Lithium batteries travel as dangerous goods as a rule. Check that the UN 38.3 test summary covers the exact battery type and model being shipped — a letter saying “tested to UN 38.3” is not a test summary — and ask your forwarder which labels and documents the shipment needs. For air shipments, lithium-ion batteries packed on their own must be at no more than 30% state of charge unless the authorities approve otherwise, and since 1 January 2026 the same applies to batteries packed with equipment, except very small ones of up to 2.7 Wh; for batteries installed inside the equipment, 30% is strongly recommended but not mandatory. Ask the factory how it sets and records the charge level.
→ 48 V LFP battery, 5–16 kWh · High-voltage battery stack, 10–42 kWh · Battery storage for business: how to size it, what to check and what it costs
If the inspection fails
Do not pay the balance yet. Ask the factory to sort or rework the lot, and order a re-inspection — who pays for it should already be in the contract. If the defects are in the design or the firmware, fixing them in China is far cheaper than after delivery. Keep the report: it is your evidence if a dispute follows.
How we help
We write the checklist with you from your specification and the golden sample, agree it and the AQL values with the factory before production, and can arrange an independent inspection before you pay the balance; the inspection is paid by you. We read the report and the photos against your specification and tell you what we find. We work with orders from US$3,000.