LED mesh screen P50 for media facades
A see-through LED mesh hung on steel wire ropes in front of a building: images and video at the scale of the whole facade, while part of the daylight and the view from inside pass through.
Where it is used
- Building facades, including sports halls
- Bridges and overpasses
- Light installations in public squares
Price on request: it depends on the configuration, quantity and country of delivery. We reply within two business days.
Specifications
- Pixels
- 50 mm pitch, 400 pixels per m²; 4 RGB LEDs per pixel (2727), 16-bit grey scale (65,536 levels)
- Brightness
- 2,300 nits with 4 LEDs per pixel (manufacturer's calculation); 1,528 nits with 2 LEDs, 4,240 with 6
- Open area
- 58.3% (manufacturer's "permeability")
- Weight
- 4.9 kg per m²
- Power
- 1 W per pixel, 400 W per m² for the 4-LED version (±10%); on average about a third of that, according to the manufacturer. The 2-LED version takes 0.7 W per pixel, the 6-LED version 1.3 W
- Power supply
- DC 24 V for the 4-LED version (DC 12 V with 2 LEDs; 12 to 48 V to order, according to the manufacturer), from outdoor control and power boxes
- Protection
- Pixels IP67, −20 to +60 °C; LED beam angle 110°
- Pixel
- 28 × 20 × 11.8 mm, PC body in black or grey with a clear PC cover, flammability class 94 V-0, operating life 50,000 h
- Control
- Video from a master controller, which also adjusts the brightness; switching the screen off needs an additional switch; outdoor control and power boxes (AC 100–240 V in); dimming and switch-off on a schedule — we confirm them with the factory for each project
- Installation
- Hung on steel wire ropes; long links between controllers run over fibre
- Other pitches
- 31.25 to 150 mm — open area from 29.8% to 86.9%, weight from 10 to 1.2 kg per m²
- Warranty
- 3 years, 5 years at extra cost, according to the manufacturer (we confirm the terms with each quote)
Specifications are from the manufacturer's catalogue and may change; we confirm them in the quote.