Energy storage PCS 500 / 630 kW
A power conversion system without an isolation transformer that connects a battery to a 400 V three-phase grid: 500 or 630 kW per unit, several units in parallel, with low and high voltage ride-through.

Where it is used
- Grid-side battery storage and storage at wind farms
- Solar (PV) charging stations
- Frequency regulation alongside combined heat and power plants
- Larger systems built from several units in parallel
Price on request: it depends on the configuration, quantity and country of delivery. We reply within two business days.
Specifications
- Power
- 500 or 630 kW rated, 550 or 693 kW maximum
- Battery side
- 600–900 V DC, up to 929 A (500 kW) or 1,170 A (630 kW)
- Grid side
- 400 V three-phase (320–460 V), three wires plus PE, 50/60 Hz; rated current 722 / 909 A, maximum 800 / 1,000 A; current distortion (THDi) below 3%; power factor settable from 1 leading to 1 lagging
- Grid support
- Low and high voltage ride-through; constant-voltage and constant-power control; several units in parallel
- Efficiency
- Up to 98.7%; self-consumption below 0.5%
- Enclosure
- IP21, forced air cooling, −30…+55 °C, humidity 0–95% non-condensing, up to 5000 m (derating above 3000 m), noise below 70 dB
- Size and weight
- 1000 × 700 × 2050 mm (W × D × H), 950 kg
- Communication
- LCD touch panel; battery management system (BMS) via RS-485 or CAN, energy management system (EMS) via RS-485 or TCP/IP
- Certificates
- IEC/EN 62109-1/-2, EN 62477-1, IEC/EN 61000-6-2/-6-4, EN 50549-1, PTPIREE type B; Chinese GB/T 34120, GB/T 34133 and CGC-R46103 (as stated by the manufacturer)
Specifications are from the manufacturer's catalogue and may change; we confirm them in the quote.
Energy storage PCS 500 / 630 kW
